Thiết bị mạng Switch Cisco WS-C2960CX-8PC-L
Dòng Switch 2960CX Series cho phép chúng ta nâng cấp đẩy đủ các tính năng Layer 2 với chi phí tiết kiệm hơn so với dòng 3560CX.
Mã sản phẩm:
WS-C2960CX-8PC-LTình trạng:
Mới 100%Giao hàng trong 3 ngày
Giao hàng từ Hà Nội
Thông số kỹ thuật chi tiết của WS-C2960CX-8PC-L:
Description |
Specification |
|||||||
Performance |
Forwarding Bandwidth |
12 Gbps |
||||||
Switching Bandwidth (full-duplex capacity) |
24 Gbps |
|||||||
Flash memory |
128 MB |
|||||||
Memory DRAM |
512 MB |
|||||||
Max VLANs |
255 |
|||||||
VLAN IDs |
4000 |
|||||||
Maximum transmission unit (MTU) |
Up to 9000 bytes |
|||||||
Jumbo frames |
9198 bytes |
|||||||
Forwarding rate 64 Byte Packet Cisco Catalyst |
||||||||
WS-C2960CX-8PC-L |
17.9 mpps |
|||||||
See the release notes for the SDM Templates for 3560-CX and 2960-CX: http://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst2960cx_3650cx/software/release/15-2_3_e/release_notes/rn-1523e-2960cx-3560cx.html |
||||||||
Connectors and cabling |
Cisco Catalyst 3560-CX and 2960-CX Ethernet Interfaces: - 10BASE-T ports: RJ-45 connectors, 2-pair Category 3, 4, or 5 unshielded twisted-pair (UTP) cabling - 100BASE-TX ports: RJ-45 connectors, 2-pair Category 5 UTP cabling - 1000BASE-T ports: RJ-45 connectors, 4-pair Category 5 UTP cabling - 1000BASE-T SFP-based ports: RJ-45 connectors, 4-pair Category 5 UTP cabling Cisco Catalyst 3560-CX and 2960-CX SFP and SFP+ interfaces: For information about supported SFP/SFP+ modules, refer to the Transceiver Compatibility matrix tables at http://www.cisco.com/c/en/us/support/interfaces-modules/transceiver-modules/products-device-support-tables-list.html |
|||||||
Power connectors |
- Customers can provide power to a switch by using the internal power supply. The connector is located at the back of the switch. The internal power supply is an autoranging unit - The internal power supply supports input voltages between 100 and 240VAC - Use the supplied AC power cord to connect the AC power connector to an AC power outlet |
|||||||
Per-port status: Link integrity, disabled, activity, speed, full-duplex System status: System, link status, link duplex, link speed |
||||||||
Dimensions |
2960-CX |
Inches |
Centimeters |
|||||
WS-C2960CX-8PC-L |
1.75 x 10.6 x 9.4 |
4.44 x 26.9 x 23.8 |
||||||
Weight |
Cisco Catalyst |
Pounds |
Kilograms |
|||||
WS-C2960CX-8PC-L |
5.0 |
2.27 |
||||||
Environmental ranges |
|
Cisco Catalyst 2960CX |
|
|||||
Operating* temperature up to 5000 ft (1524 m) |
-5°C to +45°C** |
+23°F to +113°F |
||||||
Operating* temperature up to 10,000 ft (3048 m) |
-5°C to +45°C |
+23°F to +113°F |
||||||
Storage temperature up to 15,000 ft (4572 m) |
-25°C to +70°C |
-13°F to +158°F |
||||||
Operating altitude |
Up to 3048 m |
Up to 10,000 ft |
||||||
Storage altitude |
Up to 4000 m |
Up to 15,000 ft |
||||||
Operating relative humidity |
5% to 95% noncondensing |
|||||||
Storage relative humidity |
5% to 95% noncondensing |
|||||||
Mean time between failure (MTBF) |
Cisco Catalyst 3560-CX |
MTBF |
||||||
WS-C2960CX-8PC-L |
756,260 |
Thông số kỹ thuật chi tiết của WS-C2960CX-8PC-L:
Description |
Specification |
|||||||
Performance |
Forwarding Bandwidth |
12 Gbps |
||||||
Switching Bandwidth (full-duplex capacity) |
24 Gbps |
|||||||
Flash memory |
128 MB |
|||||||
Memory DRAM |
512 MB |
|||||||
Max VLANs |
255 |
|||||||
VLAN IDs |
4000 |
|||||||
Maximum transmission unit (MTU) |
Up to 9000 bytes |
|||||||
Jumbo frames |
9198 bytes |
|||||||
Forwarding rate 64 Byte Packet Cisco Catalyst |
||||||||
WS-C2960CX-8PC-L |
17.9 mpps |
|||||||
See the release notes for the SDM Templates for 3560-CX and 2960-CX: http://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst2960cx_3650cx/software/release/15-2_3_e/release_notes/rn-1523e-2960cx-3560cx.html |
||||||||
Connectors and cabling |
Cisco Catalyst 3560-CX and 2960-CX Ethernet Interfaces: - 10BASE-T ports: RJ-45 connectors, 2-pair Category 3, 4, or 5 unshielded twisted-pair (UTP) cabling - 100BASE-TX ports: RJ-45 connectors, 2-pair Category 5 UTP cabling - 1000BASE-T ports: RJ-45 connectors, 4-pair Category 5 UTP cabling - 1000BASE-T SFP-based ports: RJ-45 connectors, 4-pair Category 5 UTP cabling Cisco Catalyst 3560-CX and 2960-CX SFP and SFP+ interfaces: For information about supported SFP/SFP+ modules, refer to the Transceiver Compatibility matrix tables at http://www.cisco.com/c/en/us/support/interfaces-modules/transceiver-modules/products-device-support-tables-list.html |
|||||||
Power connectors |
- Customers can provide power to a switch by using the internal power supply. The connector is located at the back of the switch. The internal power supply is an autoranging unit - The internal power supply supports input voltages between 100 and 240VAC - Use the supplied AC power cord to connect the AC power connector to an AC power outlet |
|||||||
Per-port status: Link integrity, disabled, activity, speed, full-duplex System status: System, link status, link duplex, link speed |
||||||||
Dimensions |
2960-CX |
Inches |
Centimeters |
|||||
WS-C2960CX-8PC-L |
1.75 x 10.6 x 9.4 |
4.44 x 26.9 x 23.8 |
||||||
Weight |
Cisco Catalyst |
Pounds |
Kilograms |
|||||
WS-C2960CX-8PC-L |
5.0 |
2.27 |
||||||
Environmental ranges |
|
Cisco Catalyst 2960CX |
|
|||||
Operating* temperature up to 5000 ft (1524 m) |
-5°C to +45°C** |
+23°F to +113°F |
||||||
Operating* temperature up to 10,000 ft (3048 m) |
-5°C to +45°C |
+23°F to +113°F |
||||||
Storage temperature up to 15,000 ft (4572 m) |
-25°C to +70°C |
-13°F to +158°F |
||||||
Operating altitude |
Up to 3048 m |
Up to 10,000 ft |
||||||
Storage altitude |
Up to 4000 m |
Up to 15,000 ft |
||||||
Operating relative humidity |
5% to 95% noncondensing |
|||||||
Storage relative humidity |
5% to 95% noncondensing |
|||||||
Mean time between failure (MTBF) |
Cisco Catalyst 3560-CX |
MTBF |
||||||
WS-C2960CX-8PC-L |
756,260 |